Click to enlarge
Previous product
EN Centrifuge Pumps
Back to products
Next product
ECM100S Pumps

EHS Pumps

Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
Add to wishlist
Compare
Add to quote
SKU: AQU2371 Categories: , Tags: ,
Description

Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.As a result of their reliability and the fact that they are easy to use, these pumps are widely used in domestic and civil applications such as the distribution of water in combination with small and medium sized pressure sets, for transferring liquids and for the irrigation of gardens and allotments. The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.

Features

Pump                                                             Motor
·Brass/Stainless steel impeller                   ·Copper winding
·Electrophoresis for cast iron parts          ·Built-in thermal protector for single phase motor
·Stainless Steel fabricated shaft                ·Insulation class:F
·Max.liquid temperature: +40℃                ·Protection class:IPX4
·Max.Suction:+8m                                        ·Max.ambient temperature:+40℃

Model

EHS

Related products

Compare
Close

PUM Centrifugal Pump

Performance Range 1. Max. Flow: 7.2m3/h 2. Max. Head: 27m Application Limits  1. Suction head up to 8m 2. Liquid temperature up to +90℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 3bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields 1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in solar boosting, water heater boosting, air energy boosting, various corollary equipment, etc. Features 1. Stainless steel impeller, shaft 304 2. Specially designed for view of the hot water circulation 3. High quality mechanical seal, NSK bearing, improve the reliability of the product Motor 1. Single-Phase 220V/50Hz 2. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 3. Protection: IP44 4. Insulation: F Optional Available on Request 1. NSK bearing 2. Motor whose insulation class is F 3. Other voltage or frequency is 60Hz
Quick view
Compare
Close

4SG(m) 4’’ Deep Well Pump

Performance Range
Max. Flow: 22m3/h Max. Head: 454m
Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1.Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2.Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3.Available with cable with a motor plug, disassemble conveniently; 4.Available with pump casing with plug, 2~8 m3/hrs series with single stage floating impellers, 10~16m3/hrs series with integrated stage floating impellers; 5.Installation in 4" or larger boreholes; Optional Available On Request Oil chamber is available with brass or SS304; Discharge chamber, Inlet parts are available with casting.
Quick view
Compare
Close

NK(m) 5’’ Submersible Pump

Performance Range
Max. Flow: 5.4m3/h Max. Head: 88m
Application Limits
1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.
Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Single phase motor equipped with start box which is built in capacitor ¤t mode thermal protector, convenient for replacement; 2. Built-in motor, the suction pump body 3. Installation in 5" or larger boreholes. Optional Available On Request Impeller is available with stainless steel 304
Quick view
Compare
Close

QGY(D) 4’’ Screw Pump

Performance Range
Max. Flow: 2.4m3/h Max. Head: 163m
Application Limits
1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable & reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3. Owned intellectual property of rubber stator, effective against the influence of thermal shock; 4. Installation in 4" or larger boreholes; Optional Available On Request No
Quick view
Compare
Close

3.5SE(m) 3.5’’ Deep Well Pump

Performance Range
Max. Flow: 7.2m3/h Max. Head: 169m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content (in mass fraction) up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory.Features 1. Edible oil filled motor, stable & reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3. Available with cable with a motor plug, disassemble conveniently; 4. Available with pump casing with plug, integrated stage floating impellers; 5. Installation in 3.5" or larger boreholes;Optional Available On Request NO
Quick view
Compare
Close

JET-G1 Self-Priming Jet Pump

Performance Range 1. Max. Flow: 6m3/h 2. Max. Head: 48m Application Limits  1. Suction head up to 9m 2. Liquid temperature up to +40℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 6bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields  1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in well water lifting, garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, pipeline boosting, etc. Features 1. 304 stainless steel pressed tensile pump body & pump cover 2. Hydraulic optimization design, excellent performance 3. Nozzle, guide vane and the impeller PPO engineering plastics 4. Products are complete in specifications, meet drinking water standards Motor 1. Single-Phase 220V/50Hz 2. Three-Phase 380V/50Hz 3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 4. Protection: IP44 5. Insulation: Class B Optional Available on Request 1. NSK bearing 2. Motor whose insulation class is F 3. Other voltage or frequency is 60Hz
Quick view
Compare
Close

Cpm Centrifugal Pump

Performance Range 1. Max. Flow: 8.4m3/h 2. Max. Head: 59m Application Limits  1. Suction head up to 7m 2. Liquid temperature up to +40℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 6bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields 1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in vegetable greenhouse water supply, breeding industry water supply and drainage, water tower water supply, pipeline pressurization, various corollary equipment, etc. Features  1. Single suction centrifugal pump, with high efficiency 2. Copper impeller, stable performance 3. High head, small flow rate Motor 1. Single-Phase 220V/50Hz 2. Mechanical seal: Ceramic/Graphite/NBR rubber 3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 4. Protection: IP44 5. Insulation: Class B Optional Available on Request 1. 304 stainless steel welding shaft 2. Electrophoretic pump body and connections 3. NSK bearing 4. Motor whose insulation class is F 5. Other voltage or frequency is 60Hz
Quick view
Compare
Close

3.5SG(m) 3.5’’ Deep Well Pump

Performance Range Max. Flow: 6.0m3/h Max. Head: 186m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Motor equipped with start box which is built in capacitor & current mode thermal protector, convenient for replacement; 3. Pump sleeve with screw thread, single stage floating impellers; 4. Installation in 3.5" or larger boreholes; Optional Available On Request No
Quick view