Click to enlarge
Previous product
ES Centrifuge Pumps
Back to products
Next product
EH Centrifuge Pumps

EG Centrifuge Pumps

Suitable for use with liquids that are not chemically aggressive towards the materials from which the pump is made.
Add to wishlist
Compare
Add to quote
SKU: AQU2381 Categories: , Tags: ,
Description

Suitable for use with liquids that are not chemically aggressive towards the materials from which the pump is made.The open impeller design allows liquids containing relatively high levels of impurities to be pumped without the risk of the impeller clogging. As a result of these characteristics the EG series pumps are used specifically in industry and for transferring water from canals, rivers, reservoirs, tanks, etc.The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.

Features

Pump                                                             Motor
·Brass/Stainless steel impeller                  ·Copper winding
·Electrophoresis for cast iron parts          ·Built-in thermal protector for single phase motor
·Stainless Steel fabricated shaft                ·Insulation class:F
·Max.liquid temperature: +40℃                ·Protection class:IPX4
·Max.Suction:+8m                                       ·Max.ambient temperature:+40℃

Model

EGM

Related products

Compare
Close

QJD 4’’ Deep Well Pump

Performance Range
Max. Flow: 4.8m3/h Max. Head: 119m
Application Limits
1. Max. ambient temperature< 40℃; 2. Sand content (in mass fraction) up to 0.01%; 3. Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 20m below the static water table.
Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Treble seal shield for excellent sand prevention; 2. High efficiency and lower power consumption; 3. Single phase motor with built in capacitor & thermal mode protector; 4. Pump sleeve with screw thread, single stage floating impellers; 5. Installation in 4" or larger boreholes; Optional Available On Request No
Quick view
Compare
Close

Cpm Centrifugal Pump

Performance Range 1. Max. Flow: 8.4m3/h 2. Max. Head: 59m Application Limits  1. Suction head up to 7m 2. Liquid temperature up to +40℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 6bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields 1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in vegetable greenhouse water supply, breeding industry water supply and drainage, water tower water supply, pipeline pressurization, various corollary equipment, etc. Features  1. Single suction centrifugal pump, with high efficiency 2. Copper impeller, stable performance 3. High head, small flow rate Motor 1. Single-Phase 220V/50Hz 2. Mechanical seal: Ceramic/Graphite/NBR rubber 3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 4. Protection: IP44 5. Insulation: Class B Optional Available on Request 1. 304 stainless steel welding shaft 2. Electrophoretic pump body and connections 3. NSK bearing 4. Motor whose insulation class is F 5. Other voltage or frequency is 60Hz
Quick view
Compare
Close

Fully-integrated Intelligent Variable Frequency Pump

BW(J)E and BL(T)E series fully integrated intelligent variable frequency pump is a new generation of pressurized water supply equipment newly developed by us which highly integrates variable frequency controller, water pump and pressure tank; with handsome appearance, the pump has reached the international advanced level; provided with artificial intelligence, it can adjust automatically to meet the user’s requirement for constant pressure and variable frequency water supply, so as to keep constant the pressure of water supply network and maintain the whole system at the optimal energy-efficient state.
Quick view
Compare
Close

6SE 6’’ Deep Well Pump

Performance Range
Max. Flow: 60m3/h Max. Head: 448m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Available with pump casing with plug, integrated stage floating impellers; 3. Installation in 6" or larger boreholes. Optional Available On Request No
Quick view
Compare
Close

PUM Centrifugal Pump

Performance Range 1. Max. Flow: 7.2m3/h 2. Max. Head: 27m Application Limits  1. Suction head up to 8m 2. Liquid temperature up to +90℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 3bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields 1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in solar boosting, water heater boosting, air energy boosting, various corollary equipment, etc. Features 1. Stainless steel impeller, shaft 304 2. Specially designed for view of the hot water circulation 3. High quality mechanical seal, NSK bearing, improve the reliability of the product Motor 1. Single-Phase 220V/50Hz 2. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 3. Protection: IP44 4. Insulation: F Optional Available on Request 1. NSK bearing 2. Motor whose insulation class is F 3. Other voltage or frequency is 60Hz
Quick view
Compare
Close

PW-Z Self-Priming Peripheral Pump

Applications Fields 1. The self-priming peripheral pump is suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. It’s widely used in household water supply, well water pumping, tap water pressure, water tower's supply, solar or hot water systems pressure, etc. Operating condition 1. Suction lift up to 8m 2. Liquid temperature ≤+90℃ 3. Environment temperature ≤ +40℃ 4. Max. working pressure: 5bar Features and advantages A self-priming peripheral pump for both hot and cold water. Advanced structure with lower noise. Intelligent control by both flow sensor and pressure sensor, which is convenient. Materials 1. Pump body: Cast iron with stainless steel insert 2. Motor casing: Aluminum 3. Impeller: Brass 4. Shaft: Welded by SUS304 and Cs45# 5. Mechanical seal: Ceramic/Graphite/NBR 6. Copper winding
Quick view
Compare
Close

4SS 4’’ Deep Well Pump

Performance Range
Max. Flow: 10.8m3/h Max. Head: 330m
Application Limits
1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Single phase motor equipped with start box which built in capacitor ¤t mode thermal protector, convenient for replacement; 3. Available with stainless steel pump head, effective against the corrosion and abrasive wear; 4. Installation in 4" or larger boreholes. Optional Available On Request Pipe connection of discharge chamber is available with 1.25", 1.5", 2".
Quick view
Compare
Close

3SG(m) 3’’ Deep Well Pump

Performance Range Max. Flow: 3.6m3/h Max. Head: 142m Application Limits  1. Max. ambient temperature < 40℃; 2. Sand content (in mass fraction) up to 0.01%; 3. Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/Domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features  1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Single phase motor equipped with start box which is built in capacitor ¤t mode thermal protector, convenient for replacement; 3. Pump sleeve with screw thread, single stage floating impellers; 4. Installation in 3" or larger boreholes. Optional Available On Request Oil chamber is available with Brass or SS304; Discharge chamber, Inlet parts are available with Casting or SS304.
Quick view