Performance Curves
WQ(D)AS-CB Grinder Pump
Performance Range
Max. Flow: 123m3/h
Max. Head: 31m
Application Limits
1. Maximum liquid temperature +40℃
2. pH level from 4-10
3. Maximum liquid density 1.2×103kg/m3
4. Power frequency is 50Hz. Nominal voltage is 220VAC for single phase and 380VAC or 415VAC for three phase with the range from -10% to 10%.
5. Immersion depth from 0.5m-5m
Certificate
Application Fields
WQ(D)AS-CB series pumps are widely applied in industry, agriculture, mining, construction, municipal, environmental protection, etc. They are suitable for draining water containing particles such as short fibers, paper scraps, etc. and soft solid, such as muddy water, dirty water, domestic wastewater, sewage, manure, etc. With a good capacity of anti-clogging and anti-winding, the cutter pump are especially applicable for pumping household wastewater and mixed fluid with insoluble solids content such as fibers, bags, belts, straw, cloth, paper, sand, etc. They are ideal equipment for agricultural irrigation and drainage, pool silt cleaning and site construction, but do not apply to the location with explosion-proof requirements.
Features
1. Cutting impeller which is wear-resistant called: QT450-10, the pump body, motor bracket and the roof are all durable for cast iron material.
2. Stainless steel shaft extension, carbide double-side mechanical sealing.
3. Single phase with control box and the built-in thermal protector to protect the motor.
4. Stainless steel ring handle.
Related products
QB Peripheral Pump
Performance Range
1. Max. Flow: 3.6m3/h
2. Max. Head: 60m
Application Limits
1. Suction head up to 8m
2. Liquid temperature up to +40℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 6bar
5. Voltage fluctuation should not exceed 10% of rated value.
6. pH: 6.5 to 8.5
Certificate
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, various corollary equipment, etc.
Features
1. Small size, high pressure
2. Easy installation & maintain
Motor
1. Single-Phase 220V/50Hz
2. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
3. Protection: IP44
4. Insulation: Class B
Optional Available On Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. Stainless steel insert
4. NSK bearing
5. Motor whose insulation class is F
6. Other voltage or frequency is 60Hz
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, various corollary equipment, etc.
Features
1. Small size, high pressure
2. Easy installation & maintain
Motor
1. Single-Phase 220V/50Hz
2. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
3. Protection: IP44
4. Insulation: Class B
Optional Available On Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. Stainless steel insert
4. NSK bearing
5. Motor whose insulation class is F
6. Other voltage or frequency is 60Hz 
4SS 4’’ Deep Well Pump
Performance Range
Max. Flow: 10.8m3/h
Max. Head: 330m
Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.Certificate Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Single phase motor equipped with start box which built in capacitor ¤t mode thermal protector, convenient for replacement;
3. Available with stainless steel pump head, effective against the corrosion and abrasive wear;
4. Installation in 4" or larger boreholes.
Optional Available On Request
Pipe connection of discharge chamber is available with 1.25", 1.5", 2".
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Single phase motor equipped with start box which built in capacitor ¤t mode thermal protector, convenient for replacement;
3. Available with stainless steel pump head, effective against the corrosion and abrasive wear;
4. Installation in 4" or larger boreholes.
Optional Available On Request
Pipe connection of discharge chamber is available with 1.25", 1.5", 2".
SHF(m) Centrifugal Pump
Performance Range
1. Max. Flow: 129m3/h
2. Max. Head: 22.5m
Application Limits
1. Suction head up to 7m
2. Liquid temperature up to +40℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 3bar
5. Voltage fluctuation should not exceed 10% of rated value.
6. pH: 6.5 to 8.5
Certificate
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in farm irrigation, garden irrigation, breeding industry water supply and drainage, etc.
Features
1. Large flow, high efficiency
2. Compact structure, easy to install
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Mechanical seal: Ceramic/Graphite/NBR rubber
4. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
5. Protection: IP44
6. Insulation: Class B
Optional Available on Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in farm irrigation, garden irrigation, breeding industry water supply and drainage, etc.
Features
1. Large flow, high efficiency
2. Compact structure, easy to install
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Mechanical seal: Ceramic/Graphite/NBR rubber
4. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
5. Protection: IP44
6. Insulation: Class B
Optional Available on Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz 
NK(m) 5’’ Submersible Pump
Performance Range
Max. Flow: 5.4m3/h
Max. Head: 88m
Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.
Certificate
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Single phase motor equipped with start box which is built in capacitor ¤t mode thermal protector, convenient for replacement;
2. Built-in motor, the suction pump body
3. Installation in 5" or larger boreholes.
Optional Available On Request
Impeller is available with stainless steel 304
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Single phase motor equipped with start box which is built in capacitor ¤t mode thermal protector, convenient for replacement;
2. Built-in motor, the suction pump body
3. Installation in 5" or larger boreholes.
Optional Available On Request
Impeller is available with stainless steel 304
6SS 6’’ Deep Well Pump
Performance Range
Max. Flow: 78m3/h
Max. Head: 283m Application Limits 1. Max. ambient temperature < 40℃;
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.
Certificate
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Available with stainless steel pump head, effective against the corrosion and abrasive wear;
2. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
3. Available with controller box, bring about general protection;
4. Installation in 6" or larger boreholes.
Optional Available On
chamber is available with 3"or 4"
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Available with stainless steel pump head, effective against the corrosion and abrasive wear;
2. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
3. Available with controller box, bring about general protection;
4. Installation in 6" or larger boreholes.
Optional Available On
chamber is available with 3"or 4"
APS Intelligent Frequency Converter Circulation Pump
Performance Range
1. Max. Flow: 3.5m3/h
2. Max. Head: 6m
Application Limits
1. Liquid temperature: 2℃~110℃
2. Maximum ambient temperature +40℃
3. Maximum system pressure 10bar
4. Protection level: IP44
5. Mains connection: 220V 50Hz/60Hz
6. Insulation class: F
7. Pumped liquid characteristics: clean, free from solids and mineral oils, non-toxic, chemically neutral, close to the characteristics of water
8. Installation: the motor shaft must be kept in horizontal direction
9. pH: 6.5 to 8.5
Certificate
Applications Fields
For domestic hot water system such as mix water underfloor heating system, air energy hot water circulation system, solar hot water circulation system and family hot, cold water pressurization circulation, etc.
Features
1. "A" rated energy efficiency-lowest power consumption
2. Permanent magnet motor-intelligent frequency conversion control
3. Compact design, with control box integrated into the pump head
4. Proportional pressure mode(PP)
5. Constant pressure mode(CP)
6. Constant speed mode(S)
7. AUTO mode
8. Night-setback mode
9. Actual power display
10. Low noise, no leakage
Optional Available on Request
1. Products can be customized according to customer's voltage and frequency
2. Brass pump body, enamel pump body, stainless steel pump body
Applications Fields
For domestic hot water system such as mix water underfloor heating system, air energy hot water circulation system, solar hot water circulation system and family hot, cold water pressurization circulation, etc.
Features
1. "A" rated energy efficiency-lowest power consumption
2. Permanent magnet motor-intelligent frequency conversion control
3. Compact design, with control box integrated into the pump head
4. Proportional pressure mode(PP)
5. Constant pressure mode(CP)
6. Constant speed mode(S)
7. AUTO mode
8. Night-setback mode
9. Actual power display
10. Low noise, no leakage
Optional Available on Request
1. Products can be customized according to customer's voltage and frequency
2. Brass pump body, enamel pump body, stainless steel pump body 
Horizontal Multi-Stage Centrifugal Pump
BW, BWJ(T) stainless steel horizontal multistage centrifugal pumps are non-self priming pumps used for transporting liquid. They are classified into two kinds: cylinder type and sectional type. They adopt horizontal motor and alloy mechanical seal, which makes the replacement more convenient. The overflowing part of the horizontal process pump is made of stainless steel 304, applicable for light-corrosion medium. Relying on the high efficiency, energy saving performance, reliable quality, wide usable range, our products receive the great popularity after being launched.
3SE(m) 3’’ Deep Well Pump
Performance Range
Max. Flow: 3.6m3/h
Max. Head: 142m
Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content (in mass fraction) up to 0.01%;
3. Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.
Certificate
Application Fields
1. Building/construction work/Domestic water supply;
2. Irrigation and Small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable & reliable running with pressure regulating membrane;
2. Single phase motor with built in B Grade oil proofed capacitor & thermal mode protector;
3. Available with pump casing with plug, single stage floating impellers;
4. Installation in 3" or larger boreholes.
Optional available on request
Discharge chamber, Inlet parts are available with Brass or Stainless steel 304.
