Performance Curves
WQ(D) Multi-stage Submersible Sewage Pump
Performance Range
Max. Flow: 140m3/h
Max. Head: 44m
Application Limits
1. Maximum liquid temperature +40℃
2. pH level from 4-10
3. Maximum liquid density 1.2×103kg/m3
4. Power frequency is 50Hz. Nominal voltage is 220VAC for single phase and 380VAC or 415VAC for three phase with the range from -10% to 10%.
5. Immersion depth from 0.5m-5m
Certificate
Application Fields
WQ(D) series pumps are widely applied in industry, agriculture, mining, construction, municipal, environmental protection, etc. They are suitable for draining water containing particles such as short fibers, paper scraps, etc. and soft solid, such as muddy water, dirty water, domestic wastewater, sewage, manure, etc. They are ideal equipment for agricultural irrigation and drainage, pool silt cleaning and site construction, but do not apply to the location with explosion-proof requirements.
Features
1. Wear-resistant whole cast iron parts design
2. Double channel impeller, good flow capacity, excellent hydraulic performance
3. The stainless steel shaft extension, carbide double sides mechanical sealing
Optional Available on Request
Other voltage or frequency is 60Hz
Related products
3.5SG(m) 3.5’’ Deep Well Pump
Performance Range
Max. Flow: 6.0m3/h
Max. Head: 186m Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.
Certificate
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Motor equipped with start box which is built in capacitor & current mode thermal protector, convenient for replacement;
3. Pump sleeve with screw thread, single stage floating impellers;
4. Installation in 3.5" or larger boreholes;
Optional Available On Request
No
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable& reliable running with pressure regulating membrane;
2. Motor equipped with start box which is built in capacitor & current mode thermal protector, convenient for replacement;
3. Pump sleeve with screw thread, single stage floating impellers;
4. Installation in 3.5" or larger boreholes;
Optional Available On Request
No
SGT Centrifugal Pump
Performance Range
1. Max. Flow: 39m3/h
2. Max. Head: 52m
Application Limits
1. Suction head up to 8m
2. Liquid temperature up to +60℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 6bar
5. Voltage fluctuation should not exceed 10% of rated value.
6. pH: 6.5 to 8.5
Certificate
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in industrial and urban water supply, high-rise building boosting, fire protection system, breeding
Features
1. Standard flange centrifugal pump
2. Large flow, high efficiency
Motor
1. Three-Phase 380V/50Hz
2. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
3. Protection: IP44
4. Insulation: Class B
Optional Available on Request
1. Motor whose insulation class is F
2. NSK bearing
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in industrial and urban water supply, high-rise building boosting, fire protection system, breeding
Features
1. Standard flange centrifugal pump
2. Large flow, high efficiency
Motor
1. Three-Phase 380V/50Hz
2. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
3. Protection: IP44
4. Insulation: Class B
Optional Available on Request
1. Motor whose insulation class is F
2. NSK bearing 
JET-G1 Self-Priming Jet Pump
Performance Range
1. Max. Flow: 6m3/h
2. Max. Head: 48m
Application Limits
1. Suction head up to 9m
2. Liquid temperature up to +40℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 6bar
5. Voltage fluctuation should not exceed 10% of rated value.
6. pH: 6.5 to 8.5
Certificate
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in well water lifting, garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, pipeline boosting, etc.
Features
1. 304 stainless steel pressed tensile pump body & pump cover
2. Hydraulic optimization design, excellent performance
3. Nozzle, guide vane and the impeller PPO engineering plastics
4. Products are complete in specifications, meet drinking water standards
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
4. Protection: IP44
5. Insulation: Class B
Optional Available on Request
1. NSK bearing
2. Motor whose insulation class is F
3. Other voltage or frequency is 60Hz
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in well water lifting, garden irrigation, vegetable greenhouse water supply, breeding industry water supply and drainage, pipeline boosting, etc.
Features
1. 304 stainless steel pressed tensile pump body & pump cover
2. Hydraulic optimization design, excellent performance
3. Nozzle, guide vane and the impeller PPO engineering plastics
4. Products are complete in specifications, meet drinking water standards
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
4. Protection: IP44
5. Insulation: Class B
Optional Available on Request
1. NSK bearing
2. Motor whose insulation class is F
3. Other voltage or frequency is 60Hz 
NK(m) 5’’ Submersible Pump
Performance Range
Max. Flow: 5.4m3/h
Max. Head: 88m
Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.
Certificate
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Single phase motor equipped with start box which is built in capacitor ¤t mode thermal protector, convenient for replacement;
2. Built-in motor, the suction pump body
3. Installation in 5" or larger boreholes.
Optional Available On Request
Impeller is available with stainless steel 304
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Single phase motor equipped with start box which is built in capacitor ¤t mode thermal protector, convenient for replacement;
2. Built-in motor, the suction pump body
3. Installation in 5" or larger boreholes.
Optional Available On Request
Impeller is available with stainless steel 304
JET Self-Priming Jet Pump
Performance Range
1. Max. Flow: 6m3/h
2. Max. Head: 80m
Application Limits
1. Suction head up to 9m
2. Liquid temperature up to +40℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 5bar
5. Voltage fluctuation should not exceed 10% of rated value.
6. pH: 6.5 to 8.5
Certificate
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in living water supply, water tower water supply, well water lifting, automatic irrigation system, various corollary equipment, etc.
Features
1. The JET type self-priming pump
2. High suction, with short time
3. Different impeller material configuration
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
4. Protection: IP44
5. Insulation: Class B
Optional Available on Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in living water supply, water tower water supply, well water lifting, automatic irrigation system, various corollary equipment, etc.
Features
1. The JET type self-priming pump
2. High suction, with short time
3. Different impeller material configuration
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
4. Protection: IP44
5. Insulation: Class B
Optional Available on Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz 
QGY(D) 4’’ Screw Pump
Performance Range
Max. Flow: 2.4m3/h
Max. Head: 163m
Application Limits
1. Max. ambient temperature < 40℃;
2. Sand content(in mass fraction)up to 0.01%;
3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;
4. pH 6.5 to 8.5;
5. Maximum: 70m below the static water table.Certificate Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable & reliable running with pressure regulating membrane;
2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector;
3. Owned intellectual property of rubber stator, effective against the influence of thermal shock;
4. Installation in 4" or larger boreholes;
Optional Available On Request
No
Application Fields
1. Building/construction work/domestic water supply;
2. Irrigation and small water work;
3. Landscaping;
4. Water conservancy system;
5. Factory.
Features
1. Edible oil filled motor, stable & reliable running with pressure regulating membrane;
2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector;
3. Owned intellectual property of rubber stator, effective against the influence of thermal shock;
4. Installation in 4" or larger boreholes;
Optional Available On Request
No
Vertical Multi-Stage Centrifugal Pump
BL(T) series stainless steel multi-stage centrifugal pump (afterwards called pump) boasts characters of high efficiency, low noise, steady operation, etc. The hydraulic pump set adopts the non-self-priming vertical multi-stage structure, ensuring a compact body, easy installation, convenient operation and maintenance.
SHF(m) Centrifugal Pump
Performance Range
1. Max. Flow: 129m3/h
2. Max. Head: 22.5m
Application Limits
1. Suction head up to 7m
2. Liquid temperature up to +40℃
3. Ambient temperature up to +40℃
4. Max. Working pressure: 3bar
5. Voltage fluctuation should not exceed 10% of rated value.
6. pH: 6.5 to 8.5
Certificate
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in farm irrigation, garden irrigation, breeding industry water supply and drainage, etc.
Features
1. Large flow, high efficiency
2. Compact structure, easy to install
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Mechanical seal: Ceramic/Graphite/NBR rubber
4. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
5. Protection: IP44
6. Insulation: Class B
Optional Available on Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz
Applications Fields
1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.
2. Widely used in farm irrigation, garden irrigation, breeding industry water supply and drainage, etc.
Features
1. Large flow, high efficiency
2. Compact structure, easy to install
Motor
1. Single-Phase 220V/50Hz
2. Three-Phase 380V/50Hz
3. Mechanical seal: Ceramic/Graphite/NBR rubber
4. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running
5. Protection: IP44
6. Insulation: Class B
Optional Available on Request
1. 304 stainless steel welding shaft
2. Electrophoretic pump body and connections
3. NSK bearing
4. Motor whose insulation class is F
5. Other voltage or frequency is 60Hz 
