Click to enlarge
Previous product
TSQB SOLAR PUMP
Back to products
Next product
4TSC Solar Pump

5TSS Solar Pump

1.APPLICATION AREA:

This project products are mainly used in dry region for irrigation of agriculture, It can be used for drinking water and
living water. The living condition could be much improved. It also can be used for fountains.

2.MATERIAL OF PARTS:

Outlet: stainless steel
Pump body: stainless steel
Motor body: stainless steel
Bearing: C&U

3.ADVANCED TECHNOLOGY:

1.Application innovation
Compared with the traditional alternating current machine, the efficiency is improved 25% by the permanent magnetism, direct current, brushless, non-sensor motor.
2.Technics innovation
Adopt double plastic package for rotor and stator, motor insulation≥300MΩ, the motor security was much improved.
3.Structure innovation
Oil filling, convenient installation and environmental protection

4.HIGHLIGHTS

a.Energy-saving and environment-protected green products
b.High technique products adopting MPPT and DSP chip technique.
c.100% copper wire, cold-rolled silicon steel sheet
d.CE certificate
e.Advanced three phase brushless DC motor
f.Stainless steel 316 screws
g.3 years warranty

5.PRINCIPLE OF OPERATION:

Solar panel collects sunlight→DC electricity energy → solar controller(rectification,stabilization,amplification,filtering)→available DC electricity→(charge the batteries)→pumping water

6.ADVANTAGES OF SOLAR PUMP SYSTEM:

A.It is easier and more widely used than any other dynamoelectric driven pumps.
B.It is more economical and more environmentally friendly.

7.MODEL SELECTION:

a.The power of solar panel = power of pump ×1.3
The voltage of solar panel = the voltage of pump
The controller should be matched
b.Select the batteries according to the following formulas:
The use hour of battery =
The battery capacity ÷(the machine power÷the battery voltage)×0.6 For example,the machine power is 200W, the battery
capacity is 100AH,the voltage is 12V,and the battery is fully charged,then the use hour is:100÷(200÷12)×0.6=3.6hours
c.The battery capacity=
the use hour ÷0.6×(the machine power÷the battery voltage) For example,the machine power is 200W,the battery voltage
is 12V,and the battery need to be used for 3.6hours,then the battery capacity is:3.6÷0.6×（200÷12）=100AH

Add to wishlist
Compare
Add to quote
SKU: PUM8924 Categories: , , , Tags: , , ,
Description

5TSS SOLAR PUMP3

Characteristic

5TSS SOLAR PUMP2

 

 

 

Related products

Compare
Close

4SG(m) 4’’ Deep Well Pump

Performance Range
Max. Flow: 22m3/h Max. Head: 454m
Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1.Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2.Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3.Available with cable with a motor plug, disassemble conveniently; 4.Available with pump casing with plug, 2~8 m3/hrs series with single stage floating impellers, 10~16m3/hrs series with integrated stage floating impellers; 5.Installation in 4" or larger boreholes; Optional Available On Request Oil chamber is available with brass or SS304; Discharge chamber, Inlet parts are available with casting.
Quick view
Compare
Close

4SS 4’’ Deep Well Pump

Performance Range
Max. Flow: 10.8m3/h Max. Head: 330m
Application Limits
1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Single phase motor equipped with start box which built in capacitor ¤t mode thermal protector, convenient for replacement; 3. Available with stainless steel pump head, effective against the corrosion and abrasive wear; 4. Installation in 4" or larger boreholes. Optional Available On Request Pipe connection of discharge chamber is available with 1.25", 1.5", 2".
Quick view
Compare
Close

3SE(m) 3’’ Deep Well Pump

Performance Range Max. Flow: 3.6m3/h Max. Head: 142m
Application Limits  1. Max. ambient temperature < 40℃; 2. Sand content (in mass fraction) up to 0.01%; 3. Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.
Certificate
Application Fields 1. Building/construction work/Domestic water supply; 2. Irrigation and Small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory.
Features 1. Edible oil filled motor, stable & reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor & thermal mode protector; 3. Available with pump casing with plug, single stage floating impellers; 4. Installation in 3" or larger boreholes.
Optional available on request Discharge chamber, Inlet parts are available with Brass or Stainless steel 304.
Quick view
Compare
Close

3.5SE(m) 3.5’’ Deep Well Pump

Performance Range
Max. Flow: 7.2m3/h Max. Head: 169m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content (in mass fraction) up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table.Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory.Features 1. Edible oil filled motor, stable & reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3. Available with cable with a motor plug, disassemble conveniently; 4. Available with pump casing with plug, integrated stage floating impellers; 5. Installation in 3.5" or larger boreholes;Optional Available On Request NO
Quick view
Compare
Close

PUM Centrifugal Pump

Performance Range 1. Max. Flow: 7.2m3/h 2. Max. Head: 27m Application Limits  1. Suction head up to 8m 2. Liquid temperature up to +90℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 3bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields 1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in solar boosting, water heater boosting, air energy boosting, various corollary equipment, etc. Features 1. Stainless steel impeller, shaft 304 2. Specially designed for view of the hot water circulation 3. High quality mechanical seal, NSK bearing, improve the reliability of the product Motor 1. Single-Phase 220V/50Hz 2. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 3. Protection: IP44 4. Insulation: F Optional Available on Request 1. NSK bearing 2. Motor whose insulation class is F 3. Other voltage or frequency is 60Hz
Quick view
Compare
Close

4SE(m) 4’’ Deep Well Pump

Performance Range Max. Flow: 22m3/h Max. Head: 480m Application Limits 1. Max. ambient temperature < 40℃; 2. Sand content(in mass fraction)up to 0.01%; 3. hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L; 4. pH 6.5 to 8.5; 5. Maximum: 70m below the static water table. Certificate Application Fields 1. Building/construction work/domestic water supply; 2. Irrigation and small water work; 3. Landscaping; 4. Water conservancy system; 5. Factory. Features 1. Edible oil filled motor, stable& reliable running with pressure regulating membrane; 2. Single phase motor with built in B Grade oil proofed capacitor &thermal mode protector; 3. Available with cable with a motor plug, disassemble conveniently; 4. Available with pump casing with plug, 2~8 m3/hrs series with single stage floating impellers, 10~16m3/hrs series with integrated stage floating impellers; 5. Installation in 4" or larger boreholes; Optional Available On Request Oil chamber is available with brass or SS304; Discharge chamber, Inlet parts are available SS304.
Quick view
Compare
Close

AWZB Automatic Self-Priming Peripheral Pump

Performance Range 1. Max. Flow: 4.8m3/h 2. Max. Head: 50m Application Limits  1. Suction head up to 8m 2. Liquid temperature up to +90℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 5bar 5. Voltage fluctuation should not exceed 10% of rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields  1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in living water supply, water tower water supply, automatic irrigation system, well water lifting, various corollary equipment, etc. Features  1. Automatic self-priming pump 2. Bulit-in check valve 3. Stainless steel 304 inserts Motor 1. Single-Phase 220V/50Hz 2. Mechanical seal: Ceramic/Graphite/EPDM rubber 3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 4. Protection: IP44 5. Insulation: Class B Optional Available on Request 1. 304 stainless steel welding shaft 2. Electrophoretic pump body and connections 3. NSK bearing 4. Motor whose insulation class is F 5. Other voltage or frequency is 60Hz
Quick view
Compare
Close

WZB Self-Priming Peripheral Pump

Performance Range 1. Max. Flow: 64m3/h 2. Max. Head: 55m Application Limits  1. Suction head up to 8m 2. Liquid temperature up to +60℃ 3. Ambient temperature up to +40℃ 4. Max. Working pressure: 6bar 5. Voltage fluctuation should not exceed 10% f rated value. 6. pH: 6.5 to 8.5 Certificate Applications Fields  1. Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water. 2. Widely used in well water lifting, water tower water supply, living water supply, automatic irrigation system, small air conditioning system, various corollary equipment, etc. Features 1. Self-priming pump 2. Built-in one-way valve 3. Add the impeller axial direction contact surface，stainless steel 304 inserts Motor 1. Single-Phase 220V/50Hz 2. Three-Phase 380V/50Hz 3. Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running 4. Protection: IP44 5. Insulation: Class B Optional Available On Request 1. 304 stainless steel welding shaft 2. Electrophoretic pump body and connections 3. NSK bearing 4. Motor whose insulation class is F 5. Other voltage or frequency is 60Hz
Quick view